Know When Your SSD Will Die
Hard drives are fundamentally different from SSDs. SSDs can die in one of two ways. In this article, we will explain the difference about how SSDs can die and how you can check if yours still have plenty of life.
The major difference between SSDs and hard drives is this: The area of a hard drive that can hold data can can be rewritten as many times as is needed, and will always be usable as long as the drive is functioning (bad sectors aside). This is not the case with SSDs: Each cell that holds data can only be written to, or programmed, a finite number of times before it is effectively dead. That’s because every time a write operation needs to be performed, any data in the cell has to be erased before it’s used. This process of writing/erasing/rewriting essentially causes wear and tear on the cells and erosion of the insulator between cells. Eventually individual cells can no longer hold a charge.
Different types of flash memory have different life cycles depending on how many bits there are per cell. Fewer bits equal fewer problems over time, and more bits cause more issues.
The most common form of flash in SSDs is called MLC, which stands for Multi-Level Cell. This means each cell can hold two bits of data, and this type of flash, generally speaking, can handle 3,000 or so cycles of erasing the cells and reprogramming them.
More recently, SSD manufacturers are using a type of flash called TLC, which stands for Triple-Level Cell. This adds one more bit to each cell, thus improving density—but at the cost of endurance. This type of flash can generally withstand 1,000 cycles, or about one-third the endurance of MLC. Note, too, that I’m talking two-dimensional or planar flash, not 3D NAND, which is a whole different animal that I won’t get into here.
All this means is your SSD has a finite lifespan, usually measured in “terabytes written” (TBW). Manufacturers don’t often quote these numbers, and your SSD might die way before it hits this magic number, or long afterward, depending on a multitude of factors.